Advertisement
Nortel Norstar
Back of IVC6 CARD
RJ11
To ensure the ports are physically connected correctly, ask the switch
administrator to place calls to each individual INTUITY
channel one at a time. Use the "System Monitor" menu in
TM
INTUITY
to monitor that the correct channel is dialed from the
switch.
7 .1 TESTING THE INSTALLATION
1 5 B
Refer to the AUDIX Administration manual for further details on
testing the installation.
Create two mailboxes associated with two test extensions. Record a
name and personal greeting for each mailbox.
Using one test extension, call the other test extension. You should
hear the appropriate greeting (see test scenarios below).
Leave a message. Verify that message waiting indication turns on.
Test call coverage scenarios:
Forward all calls - When a subscriber forward all calls to the
TM
INTUITY
number, calls placed to the subscriber should follow the
TM
correct INTUITY
Busy - Place a call to a busy extension. This should follow the right
coverage path and INTUITY
greeting.
Call no answer from INTUITY
If calls are Non-Integrated, check the following:
Check the appropriate COS has been assigned to the tip/ring lines.
The information contained in this document is provided by AVAYA Inc. to serve as a guide. See the disclaimer on page 1
RJ11
prompt should be played for that subscriber.
TM
should play the NO ANSWER
TM
scenario is the same as above.
Confidential
RJ11to
RJ11to
RJ11to
RJ11to
IVC6 card
PBX
PBX
PBX
IVP6
RJ11 to
RJ11to
RJ11to
RJ11to
IVC6 card
PBX
PBX
PBX
TM
voice
9
Advertisement
