Testing Connectivity To Customer's Network - Avaya S8500 Replacing

Unused
●
6. Using the drop-down menu, set the Corporate LAN field to Ethernet 2 to have the IPSI
control on a dedicated, separate Ethernet port.
7. Click Continue.
8. Fill in the following information for Ethernet 2:
IP address
●
Gateway
●
Subnet mask
●
Speed
●
9. Select "VLAN 802.1q priority tagging is enabled" if true.
10. Click Change.
The status of the configuration update appears in the window.
11. When the update completes, the following message appears: Successfully
configured ethernet interfaces.

Testing connectivity to customer's network

To test network connections:
1. At the Web interface select Diagnostics > Ping.
The Ping screen displays (Figure 7: Ping screen on page 12).
555-245-760 Issue 3 January 2005 11