Table of Contents
Advertisement
3. Plug in the monitor connector and tighten the screws on the connector.
4. Connect the power cord to the monitor and plug the monitor into a power
5. Turn on the monitor.
Job aid
The following graphics show the front and rear view of the HMS 400 server.
Figure 7: HMS 400 server front view
Figure 8: HMS 400 server rear view
Connecting the modem to the HMS 400 server
About this task
A modem is required to enable remote support dial-up access to the HMS 400 server. The
modem enables Avaya technical support personnel to connect to the HMS 400 server for
troubleshooting purposes. Avaya requires that you connect the modem to your server only
when you request technical assistance.
Avaya Hospitality Messaging Server 400 Installation and Commissioning
receptacle.
Connecting the modem to the HMS 400 server
March 2012
49
Advertisement
Table of Contents
