Assigning Test Ports; Displaying The E5091A Property - Agilent Technologies ENA Series User Manual

Assigning test ports

Before calibration and measurement, you need to assign the test ports of the E5091A. You
can set the connection ports for each channel and perform measurement switching the
connection for each channel.
Operational procedure
Step 1. Press -
E5091A Setup
Step 2. Press or
connection ports.
Step 3. Use the corresponding softkey to assign between the test ports of the E5091A and the
interconnection ports.
Softkey
Port1
Port2
Port3
Port4
*1.If port T1 has been already assigned to port 2 when you try to assign port T1 to port 1,
port T2 is automatically assigned to port 2. If port T1 has been already assigned to port
1 when you try to assign port T1 to port 2, port A is automatically assigned to port 1.
*2.When the E5091A Option 007 is connected, the connection is made to R2+ if R3+ has
been set; the connection is made R2- to if R3- has been set.
Step 4. Execute Step. 2 through Step. 3 for all channels for which you want to perform sweep.

Displaying the E5091A property

By displaying the E5091A property shown in Figure 13-4, you can obtain the assignment
information of the test ports for each channel. It is useful when you need to check the test
port assignment, for example, when you perform calibration.
13
to display the E5091A setup menu.
to activate a channel for which you want to set the
Function
Selects a test port of the E5091A to which you
want to connect port 1 of the E5070A/E5071A.
You can select the port from
Selects a test port of the E5091A to which you
want to connect port 2 of the E5070A/E5071A.
You can select the port from
Selects a test port of the E5091A to which you
want to connect port 3 of the E5070A/E5071A.
You can select the port from
Selects a test port of the E5091A to which you
want to connect port 4 of the E5070A/E5071A.
You can select the port from
Controlling E5091A
Setting E5091A
*1
or .
A T1
*1
or .
T1 T2
*2
, , or .
R1+ R2+ R3+
*2
, , or .
R1- R2- R3-
273