Agilent Technologies ENA Series User Manual page 229

At the same time, the Edit Limit Line menu used to create/edit the limit table is displayed.
The following lists the functions that correspond to the softkeys shown.
Softkey
Delete
Add
Clear Limit Table
Export to CSV File
Import from CSV File
Return
Step 6. to add a segment to the limit table, and then specify the segment parameter
Press Add
values shown below.
Segment Parameter
Type
*1*2
Begin Stimulus
*1*2
End Stimulus
*3*4
Begin Response
*3*4
End Response
*1.The range in which stimulus values can be specified; the resolution is the same as the
frequency range and resolution set for the E5070/E5071A. When a value outside the
specification is entered, a suitable value that meets the specification is specified.
*2.Once the stimulus value is specified, changing the frequency range of the
E5070/E5071A does not affect the stimulus value.
Chapter 10
Function
Deletes the segment containing the selected
cell from the limit table.
Adds a segment before the segment containing
the selected cell to the limit table.
Clears all the limit table data.
Exports the limit table to a file in CSV
(comma-separated value) format. For more
information, see "Saving/Calling the Limit
Table" on page 223.
Imports a limit table saved in CSV
(separated-separated value) format. For more
information, see "Saving/Calling the Limit
Table" on page 223.
Exits the Edit Limit Line menu and closes the
limit table display.
Description
Select the type of segment from the following:
OFF Segment not used for the limit test
MIN The segment at which the minimum
is specified
MAX The segment at which the maximum
is specified
Specify the starting point for the stimulus value
(frequency) on the limit line.
Specify the ending point for the stimulus value
(frequency) on the limit line.
Specify the starting point for the response value
on the limit line.
Specify the ending point for the response value
on the limit line.
Limit Test
Limit Test
221