Select The Segment Sweep As The Sweep Type; Execute The Calibration - Agilent Technologies ENA Series User Manual

Setup Description
Number of points: 38
Segment 5
Start frequency: 5.5 GHz
Stop frequency: 6.02 GHz
Number of points: 52
Figure 14-7 Completed Segment Table

3. Select the Segment Sweep as the Sweep Type

The segment sweep is selected as the sweep type.
Setup Description
Sweep type: Segment sweep

4. Execute the Calibration

In this step, a 2-port ECal module and 3-/4-port module contained in the E5070A/E5071A
are used to execute the calibration on the three ports to be used in the measurement.
Step 1. First, connect the USB port of the 2-port ECal module and the USB port of the
E5070A/E5071A with a USB cable. The connection may be made while the unit is
powered.
Chapter 14
Measurement Examples
Evaluating a Duplexer
Key Operation
Key Operation
(Moves the focus to the softkey menu)
- - -
Return Sweep Type Segment
(or -
Sweep Type
- )
Segment
289