Agilent Technologies ENA Series User Manual page 485

Table F-5 Functions of the 8753ES vs. the E5070A/E5071A
Function
Printer / Print range
Plotter output
Color settings
Line settings
Printer port
Others Time domain transformation
Take4 mode
Mixer measurement function
Harmonics measurement
Key manipulation-related GPIB command
LAN interface
protocol
function
GPIB Debug mode
pass control
GPIB address setup
Parallel port
Appendix F
Replacing the 8753ES with the E5070A/E5071A
8753ES
Entire sheet, 1/4 of a sheet
Settings definable for the colors of a
trace, reference line, text, and
warning messages
Possible
Parallel port
Serial port
GPIB
Available
Available
Available
Available (Opt. 002)
GPIB commands that perform the
same processing as do the front panel
key and softkey manipulation.
Not available
Not available
Not available
Can be turned On/Off
Available
The addresses of the main body,
controller, external disk, LO control,
power meter, printer, and plotter can
be specified by using the GPIB
command and from the front panel.
Can be used as a printer or GPIO
connector.
Comparing Functions
E5070A/E5071A
Entire sheet
Highlighting/No highlighting of all
elements
Always a solid line.
Parallel port
USB(Setting up must be executed on
Windows)
Not available
Not available
Not available
Not availabler
Not available
10 Base-T and 100 Base-TX
TCP/IP
Telnet
Not available
Not available
The address of the controller can be
specified from the front panel.
For printer use
477