Calibration; Operational Procedure - Agilent Technologies ENA Series User Manual

Rf network analyzer

Hide thumbs Also See for ENA Series:

Table of Contents

Controlling E5091A

Calibration

For calibration with the E5091A connected, because the setting of the E5091 can be

performed for each channel, you need to change the ports to which the standard is

connected for the channel even for the same measurement parameter.

Step 1. Press

calibration to the active channel.

Step 2. Follow "Displaying the E5091A property" on page 273 to display the E5091A property.

Step 3. According to Chapter 4, "Calibration," on page 77, perform calibration. Check the

connected test ports shown in the calibration property as the port names of the

E5070A/E5071A on the calibration menu, connect the calibration standard to the

corresponding test ports of the E5091A, and perform calibration.

to set the channel for which you want to perform

Show Quick Links

Table of Contents

E5070 E5071a