Agilent Technologies ENA Series User Manual page 222

Data Output
Using a Printer to Output the Screen Image
Step 2. Restart the E5070A/E5071A in the service mode
i. Press
ii. Press
iii. Enter the password
iv. Press
Step 3. Connect the printer
Turn on the printer and connect it to the E5070A/E5071A.
NOTE At this time, the Add New Hardware Wizard may appear. In this case, click
finish the Add New Hardware Wizard.
Step 4. Install the printer driver
Install the printer driver following the attached procedure document.
Step 5. Restart the E5070A/E5071A in the instrument mode
Double-click the Restart as Inst icon on the desktop (see Figure 9-11). The confirmation
message appears. Click
instrument.
214
.
Service Menu - Restart Menu
e507xa
9-7) and click the button.
OK
. The instrument is restarted and the Windows screen appears.
Restart as Service
. The E5070A/E5071A is restarted and starts up as the
OK
.
in the box of the Password dialog box (Figure
Password
to
Cancel
Chapter 9