Execute The Limit Test - Agilent Technologies ENA Series User Manual

Setup Description
Type: Upper limit
Begin Stimulus value: 1.91 GHz
End Stimulus value: 6.02 GHz
Begin Response value: 0 dB
End Response value: 0 dB
Segment 4
Type: Lower limit
Begin Stimulus value: 1.93 GHz
End Stimulus value: 1.99 GHz
Begin Response value: -5 dB
End Response value: -5 dB
Figure 14-17 Completed Limit Table for Trace 2

11. Execute the Limit Test

The limit test is executed.
Step 1. Turn on the limit line and limit test for Trace 1.
Setup Description
Activating Trace 1
Limit Line: ON
Limit Test: ON
Chapter 14
Measurement Examples
Evaluating a Duplexer
Key Operation
(Select ) -
Max
(Select
Min
Key Operation
- -
Limit Test Limit Line
(Turn it )
Limit Test ON
) -
(Turn it )
ON
299