Agilent Technologies ENA Series User Manual page 52

Overview of Functions
Screen Area: Names and Functions of Parts
5-12. Port Extension Status
Shows whether the port extension is turned ON or OFF.
(displayed in blue)
PExt
(not displayed)
5-13. Fixture Simulator Status
Shows whether the fixture simulator is turned ON or OFF.
(displayed in blue)
Sim
(not displayed)
5-14. Averaging Status
Displays the averaging factor and averaging count when averaging is turned on.
(displayed in blue)
n/m
(not displayed)
5-15. Sweep Range
Indicates the sweep range by using the start/stop or center/span.
5-16. IF Bandwidth
Indicates the IF bandwidth.
5-17. Channel Number
Indicates the channel number.
5-18. Graticule Labels
Y-axis divisions in the rectangular display format. When traces in the rectangular display
format are overlaid, the Y-axis divisions for the active trace are displayed. The value of the
reference line (the division line between
data entry bar using the keys:
reference line at one division intervals by placing the mouse pointer in the area of the
graticule label (the pointer changes from
left mouse button pressed, and then releasing the button at the desired location.
5-19. Bandwidth Parameters
Turning on the bandwidth search function displays the bandwidth parameters here. For
more about the bandwidth search function, see "Determining the Bandwidth of the Trace
(Bandwidth Search)" on page 143.
44
Port extension: ON
Port extension: OFF
Fixture simulator: ON
Fixture simulator: OFF
Averaging: ON
(m: averaging factor; n: averaging count)
Averaging: OFF
and ) is entered numerically by opening the
+
Reference Value
to ), moving the pointer vertically with the
. You can change values of the
Chapter 2