Source Control; Trace Functions - Agilent Technologies ENA Series User Manual

Specifications and Supplemental Information

Source control

Source control
Measured number of points per sweep
Sweep mode
Sweep type
Segment sweep
Sweep trigger
Power

Trace functions

Display data
Trace math
Title
Autoscale
Electrical delay
Phase Offset
Statistics
350
User definable from 2 to 1601.
Normal stepped, normal swept, fast stepped and fast swept.
Linear sweep, segment sweep and log sweep.
Define independent sweep segments. Set number of points, test port
power levels, IF bandwidth, delay time, sweep time and sweep mode
independently for each segment.
Set to continuous, hold, or single, sweep with internal, external, manual,
or bus trigger.
Set source power from -15 dBm (-50 dBm for option 214/314/414) to 0
dBm.
Display current measurement data, memory data, or current
measurement and memory data simultaneously.
Vector addition, subtraction, multiplication or division of measured
complex values and memory data.
Add custom title to each channel window. Titles are printed on
hardcopies of displayed measurements.
Automatically selects scale resolution and reference value to vertically
center the trace.
Offset measured phase or group delay by a defined amount of electrical
delay, in seconds.
Offset measured phase or group delay by a defined amount in degrees.
Calculates and displays mean, standard deviation and peak-to-peak
deviation of the data trace.
Chapter 15