Agilent Technologies ENA Series User Manual page 414

Softkey Functions
Analysis Menu
Key Operation
(Continued)
Fixture Simulator
*1
Topology
*2
Port1 (bal)
Selects test ports 2 and 3 on the analyzer for connection with (balanced)
2-3
port 1 on the DUT.
Selects test ports 2 and 4 on the analyzer for connection with (balanced)
2-4
port 1 on the DUT.
Selects test ports 3 and 4 on the analyzer for connection with (balanced)
3-4
port 1 on the DUT.
Returns to the softkey display screen one level higher.
Cancel
Displays softkeys for selecting the analyzer ports (test ports) to which (balanced) port 2 on the DUT will be
Port2 (bal)
connected. This key will be displayed only when
Selects test ports 1 and 2 on the analyzer for connection with (balanced)
1-2
port 2 on the DUT.
Selects test ports 1 and 3 on the analyzer for connection with (balanced)
1-3
port 2 on the DUT.
*2 Selects test ports 1 and 4 on the analyzer for connection with (balanced)
1-4
port 2 on the DUT.
Selects test ports 2 and 3 on the analyzer for connection with (balanced)
2-3
port 2 on the DUT.
Selects test ports 2 and 4 on the analyzer for connection with (balanced)
*2
2-4
port 2 on the DUT.
*2 Selects test ports 3 and 4 on the analyzer for connection with (balanced)
3-4
port 2 on the DUT.
Returns to the softkey display screen one level higher.
Cancel
Displays softkeys for selecting the analyzer port (test port) to which (single-end) port 2 on the DUT will be
*2
Port2 (se)
connected. This key will be displayed only when
Selects test port 1 on the analyzer for connection with (single-end) port 2
1
on the DUT.
Selects test port 2 on the analyzer for connection with (single-end) port 2
2
on the DUT.
Selects test port 3 on the analyzer for connection with (single-end) port 2
3
on the DUT.
Selects test port 4 on the analyzer for connection with (single-end) port 2
4
on the DUT.
Returns to the softkey display screen one level higher.
Cancel
Displays softkeys for selecting the analyzer ports (test ports) to which (balanced) port 3 on the DUT will be
*2
Port3 (bal)
connected. This key will be displayed only when
Selects test ports 1 and 2 on the analyzer for connection with (balanced)
1-2
port 3 on the DUT.
Selects test ports 1 and 3 on the analyzer for connection with (balanced)
1-3
port 3 on the DUT.
Selects test ports 1 and 4 on the analyzer for connection with (balanced)
1-4
port 3 on the DUT.
Selects test ports 2 and 3 on the analyzer for connection with (balanced)
2-3
port 3 on the DUT.
406
Function
or
SE-Bal Bal-Bal
in the
SE-SE-Bal
in the
SE-SE-Bal
SCPI Command
:CALC{1-9}:FSIM:BAL:TOP:BBAL
:CALC{1-9}:FSIM:BAL:TOP:BBAL
:CALC{1-9}:FSIM:BAL:TOP:BBAL
in the menu is selected.
Device
:CALC{1-9}:FSIM:BAL:TOP:BBAL
:CALC{1-9}:FSIM:BAL:TOP:SBAL
:CALC{1-9}:FSIM:BAL:TOP:BBAL
:CALC{1-9}:FSIM:BAL:TOP:SBAL
:CALC{1-9}:FSIM:BAL:TOP:BBAL
:CALC{1-9}:FSIM:BAL:TOP:SBAL
:CALC{1-9}:FSIM:BAL:TOP:BBAL
:CALC{1-9}:FSIM:BAL:TOP:SBAL
:CALC{1-9}:FSIM:BAL:TOP:BBAL
:CALC{1-9}:FSIM:BAL:TOP:SBAL
:CALC{1-9}:FSIM:BAL:TOP:BBAL
:CALC{1-9}:FSIM:BAL:TOP:SBAL
menu is selected.
Device
:CALC{1-9}:FSIM:BAL:TOP:SSB
:CALC{1-9}:FSIM:BAL:TOP:SSB
:CALC{1-9}:FSIM:BAL:TOP:SSB
:CALC{1-9}:FSIM:BAL:TOP:SSB
menu is selected.
Device
:CALC{1-9}:FSIM:BAL:TOP:SSB
:CALC{1-9}:FSIM:BAL:TOP:SSB
:CALC{1-9}:FSIM:BAL:TOP:SSB
:CALC{1-9}:FSIM:BAL:TOP:SSB
Appendix D