Change 1 - Agilent Technologies ENA Series User Manual

Change 1

The firmware revision 1.xx does not support the following functions. Please delete the
descriptions about these functions in this manual
o Sweep
• Log sweep
• Fast Stepped/Swept mode
• Sweep mode setting for each segment
o Save/Recall
• Saving/recalling instrument state for each channel
• Saving screen images as portable network graphics (.png) file
• Backing up when State01to State08 are overwritten.
o Fixture simulator
• Imbalance parameter
• CMRR
• Common port reference impedance conversion
o Parameter conversion
o Time domain
o Positive phase format
o Changing display color
o Controlling the E5091A
o ECal (Electronic Calibration)
• 4 port ECal
• Response calibration (Thru)
Appendix A
Manual Changes
Manual Changes
373