Agilent Technologies ENA Series User Manual page 15

Documentation Map
The following manuals are available for the Agilent E5070A/E5071A.
•
•
•
•
NOTE The number position shown by "x" in the part numbers above indicates the edition number.
This convention is applied to each manual, CD-ROM (for manuals), and sample programs
disk issued. Here, "0" indicates the initial edition, and each time a revision is made this
number is incremented by 1. The latest edition allows the customer to specify Option ABJ
(Japanese) or Option ABA (English) of the product.
MicrosoftÒ, MS-DOSÒ, WindowsÒ, and Visual BasicÒ for Applications are registered
trademarks of Microsoft Corporation in U.S. and other countries.
User's Guide (Part Number E5070-900x0, attached to Option ABA)
This manual describes most of the basic information needed to use the
E5070A/E5071A. It provides a function overview, detailed operation procedure for
each function (from preparation for measurement to analysis of measurement results),
measurement examples, specifications, and supplemental information. For
programming guidance on performing automatic measurement with the
E5070A/E5071A, please see the Programming Manual.
Installation and Quick Start Guide (Part Number E5070-900x1, attached to Option
ABA)
This manual describes installation of the instrument after it is delivered and the basic
procedures for applications and analysis. Refer to this manual when you use the
E5070A/E5071A for the first time.
Programmer's Guide (Part Number E5070-900x2, attached to Option ABA)
This manual provides programming information for performing automatic
measurement with the E5070A/E5071A. It includes an outline of remote control,
procedures for detecting measurement start (trigger) and end (sweep end), application
programming examples, a command reference, and related information.
VBA Programmer's Guide (Part Number E5070-900x3, attached to Option ABA)
This manual provides programming information for performing automatic
measurement with the E5070A/E5071A's internal programming function (VBA). It
includes an outline of remote control, procedures for detecting measurement start
(trigger) and end (sweep end), application programming examples, a command
reference, and related information.
7