Selecting Measurement Parameters - Agilent Technologies ENA Series User Manual

5. Selecting Measurement Parameters

Step 1. Display four traces.
Setting Description
Number of traces: 4
Trace allocation: 4-part split
Step 2. Set the measurement parameter (mixed mode S-parameter) and data format for trace 1.
Setting Description
Fixture simulator: ON
Unbalanced-balanced conversion of trace 1:
ON
Measurement parameter: S
Step 3. Set the measurement parameter (mixed mode S-parameter) and data format for trace 2.
Setting Description
Unbalanced-balanced conversion of trace 2:
ON
Measurement parameter: S
Step 4. Set the measurement parameter (mixed mode S-parameter) and data format for trace 3.
Setting Description
Unbalanced-balanced conversion of trace 3:
ON
Measurement parameter: S
Data format: Smith chart (marker display:
R+jX)
Step 5. Set the measurement parameter (mixed mode S-parameter) and data format for trace 4.
Setting Description
Unbalanced-balanced conversion of trace 4:
ON
Measurement parameter: S
Data format: Smith chart (marker display:
R+jX)
Chapter 14
Measuring an Unbalanced and Balanced Bandpass Filter
Keystroke
Allocate Traces
Keystroke
Fixture Simulator
BalUn
ds21
Keystroke
BalUn
cs21
Keystroke
BalUn
ss11
Keystroke
BalUn
dd22
Measurement Examples
- -
Number of Traces 4
-
- -
Fixture Simulator
(Turns it .)
ON
(Turns it .)
ON
-
Sds21
- -
Fixture Simulator
(Turns it .)
ON
-
Scs21
- -
Fixture Simulator
(Turns it .)
ON
-
Sss11
- -
Smith R + jX
- -
Fixture Simulator
(Turns it .)
ON
-
Sdd22
- -
Smith R + jX
-
-
-
311