Connect The Dut And Execute The Auto Scale; Specify The Electrical Delay - Agilent Technologies ENA Series User Manual

Measurement Examples
Measuring the Deviation from a Linear Phase

4. Connect the DUT and Execute the Auto Scale

The DUT is connected again as shown in Figure 14-21 to execute the auto scale.
Setup Description
Executing the auto scale
Figure 14-22 Phase Characteristics of the DUT

5. Specify the Electrical Delay

The electrical delay is entered to flatten the phase trace.
Setup Description
Entering the electrical delay
304
Key Operation
-
Auto Scale
Key Operation
- -
Electrical Delay
(Flattening a trace)
Chapter 14