Agilent Technologies ENA Series User Manual page 156

Data Analysis
Performing parameter conversion of measurement result
Selecting conversion target parameter
Step 1. Press
marker.
Step 2. Press or
Step 3. Press .
Step 4. Press
Conversion
Step 5. Press .
Function
Step 6. Press the softkey corresponding to the parameter to which you want to convert.
When the conversion function is ON, the selected parameter is displayed in the "5-5. Trace
Status Area" on page 42.
148
or to activate a channel on which you want to use the
to activate a trace on which you want to use the marker.
.
Chapter 6