Agilent Technologies ENA Series User Manual page 433

Key Operation Function
(Continued)
Allocate Channels
Displays channel windows by splitting the screen vertically into four equal
parts and then bisecting each window horizontally, with channels 1, 3, 5, and
7 displayed in left windows from top to bottom, and channels 2, 4, 6, and 8
displayed in right windows from top to bottom.
Displays channel windows by trisecting the screen both vertically and
horizontally (i.e., nine total windows), with channels 1, 2, and 3 displayed in
upper windows from left to right, channels 4, 5, and 6 displayed in middle
windows from left to right, and channels 7, 8, and 9 displayed in lower
windows from left to right.
Returns to the softkey display screen one level higher.
Cancel
Displays softkeys for setting the number of traces.
Number of Traces
Sets the number of traces to one for the active channel.
1
Sets the number of traces to two for the active channel.
2
Sets the number of traces to three for the active channel.
3
Sets the number of traces to four for the active channel.
4
Sets the number of traces to five for the active channel.
5
Sets the number of traces to six for the active channel.
6
Sets the number of traces to seven for the active channel.
7
Sets the number of traces to eight for the active channel.
8
Sets the number of traces to nine for the active channel.
9
Returns to the softkey display screen one level higher.
Cancel
Displays softkeys for setting up the trace display arrangement. Traces are displayed based on the order determined
Allocate Traces
from the graph arrangement currently being used. If the number of traces is less than the number of graphs,
nothing will be displayed in the extra area(s). If the number of traces is more than the number of graphs, the
remaining traces will be displayed by going back to the first graph, overlapping existing traces.
Displays channel 1 using the entire channel window.
Displays graphs by bisecting the screen horizontally with graph 1 on the left
and graph 2 on the right.
Displays graphs by bisecting the screen vertically, with graph 1 displayed
above graph 2.
Displays graphs by splitting the screen vertically (with the left window
occupying 2/3 of the screen), with graph 1 on the left and graph 2 on the
right.
Displays graphs by splitting the screen vertically (with the upper window
occupying 2/3 of the screen), and graph 1 displayed above graph 2.
Displays graphs by trisecting the screen horizontally, with graphs 1, 2, and 3
displayed from left to right.
Displays graphs by trisecting the screen vertically with graphs 1, 2, and 3
arranged from top to bottom.
Displays graphs by bisecting the screen vertically and then bisecting the
upper window horizontally with graphs 1, 2, and 3 displayed, respectively, in
the upper-left corner, upper-right corner, and bottom.
Displays graphs by bisecting the screen vertically and then bisecting the
lower window horizontally with graphs 1, 2, and 3 displayed, respectively, in
the top, lower-left corner, and lower-right corner.
Displays graphs by bisecting the screen horizontally and then bisecting the
left window vertically, with graphs 1, 2, and 3 displayed, respectively, in the
upper-left corner, lower-left corner, and on the right.
Appendix D
Softkey Functions
Display Menu
SCPI Command
:DISP:SPL D12_34_56_78
:DISP:SPL D123_456_789
:CALC{1-9}:PAR:COUN 1
:CALC{1-9}:PAR:COUN 2
:CALC{1-9}:PAR:COUN 3
:CALC{1-9}:PAR:COUN 4
:CALC{1-9}:PAR:COUN 5
:CALC{1-9}:PAR:COUN 6
:CALC{1-9}:PAR:COUN 7
:CALC{1-9}:PAR:COUN 8
:CALC{1-9}:PAR:COUN 9
:DISP:WIND{1-9}:SPL D1
:DISP:WIND{1-9}:SPL D1_2
:DISP:WIND{1-9}:SPL D12
:DISP:WIND{1-9}:SPL D112
:DISP:WIND{1-9}:SPL D1_1_2
:DISP:WIND{1-9}:SPL D123
:DISP:WIND{1-9}:SPL D1_2_3
:DISP:WIND{1-9}:SPL D12_33
:DISP:WIND{1-9}:SPL D11_23
:DISP:WIND{1-9}:SPL D13_23
425