Agilent Technologies ENA Series User Manual page 479

Table F-5 Functions of the 8753ES vs. the E5070A/E5071A
Function
Measurement Trigger source
(cont'd.)
External trigger line
Display Memory trace Number
Data math
Display
Frequency display
Graph layout
Math between data traces
Scale Autoscale
Reference line
Scales per division
Number of divisions
Turning the softkey area On/Off
List display
List display of Instrument State
Color settings
Screen brightness setting
Turning the LCD On/Off
Turning the update On/Off
Appendix F
Replacing the 8753ES with the E5070A/E5071A
8753ES
Internal, external (per sweep, per
point), manual (per point)
Can be set to High or Low
One per channel
Data / Memory
Data - Memory
Data trace only
Memory trace only
Simultaneous display of memory
traces and data traces
Data math only
On/Off setting is definable for all
channels.
Up to four graphs can be displayed.
The results for channel 1/channel 2
can be displayed on the trace for
channel 2.
Available
Both value and position can be
specified.
Definable
Fixed at 10
Available
Available
Available
Available
Available
Available
Always updates.
Comparing Functions
E5070A/E5071A
Internal, external (per sweep), bus,
manual (per sweep)
Low
One per trace
Data / Memory
Data ´ Memory
Data - Memory
Data + Memory
Data trace only
Memory trace only
Simultaneous display of memory
traces and data traces
Data math only
Simultaneous display of data math
and memory traces
On/off setting is definable channel
by channel.
Windows are assigned to each
channel; up to nine windows can be
displayed.
Up to nine graphs can be displayed
in each window.
Not available
¬
¬
¬
Can be set in increments of 2 from 4
to 30.
¬
Not available
Not available
¬
Not available
¬
Available
471