Manual Changes - Agilent Technologies ENA Series User Manual

Manual Changes

Manual Changes
Manual Changes
To adapt this manual to your E5070A/E5071A, refer to Table A-1 and Table A-2.
Table A-1 Manual Changes by Serial Number
Table A-2 Manual Changes by Firmware Version
Agilent Technologies uses a two-part, ten-character serial number that is stamped on the
serial number plate (Figure A-1). The first five characters are the serial prefix and the last
five digits are the suffix.
Figure A-1 Serial Number Plate
372
Serial Prefix or Number
Version
1.xx
Make Manual Changes
Make Manual Changes
Change 1
Appendix A