Table of Contents
Advertisement
Figure 2-18
Test Ports
Figure 2-19
NOTE
The right test head is illustrated below; it is shown from the rear (that is,
from the point of view of the controller). The multiple-connector panel
provides connections between the test head and the controller. The
single-connector panel contains test port 2.
Right Test Head
The illustration below shows a test port. The "ON" LED to the left of the test
port lights to indicate that the test head is receiving the required DC supply
voltages from the controller.
Test Port
The model number which appears below the test port refers to the
millimeter-wave subsystem, which consists of a millimeter-wave controller
and two test heads (85 GHz or 110 GHz).
Test Heads
8510XF Network Analyzer Systems 2-27
Installation
Advertisement
Table of Contents
