Agilent Technologies ENA Series User Manual page 53

5-20. Marker Numbers
The marker values are displayed in a list at positions 5-19, 5-20, and 5-21. Position 5-19
displays the marker numbers. For the active marker (the one for which setup and analysis
are being performed), is displayed to the left of the marker number. For the reference
>
marker, is displayed instead of the marker number.
5-21. Marker Stimulus Values
The marker stimulus value for each marker (the frequency at the marker point) is displayed
here.
5-22. Marker Response Values
The marker response value for each marker (the measurement value at the marker point) is
displayed here. Two (or three) response values are displayed for data in Smith chart or
polar display format.
5-23. Markers
The markers used for reading values on a trace. Up to 10 markers can be displayed for each
trace.
Active marker (the one for which setup and analysis are being performed)
Non-active marker
n denotes a marker number. For the reference marker, however, nothing is displayed at the
location of n. Clicking the marker or one of the "5-24. Marker Indicators" makes the
marker active.
5-24. Marker Indicators
Indicates the positions of markers on the stimulus axis.
Active marker indicator
Non-active marker indicator
You can also move a marker to the desired position by placing the mouse pointer on the
marker indicator or position of the marker itself (the pointer changes from
moving the indicator vertically with the left mouse button pressed, and then releasing the
button at the desired location.
5-25. Statistics Data
Turning on the statistics data function displays statistics data here. For more about the
statistics data function, see "Determining the Mean, Standard Deviation, and p-p of the
Trace" on page 142.
Chapter 2
Overview of Functions
Screen Area: Names and Functions of Parts
to ),
45