Agilent Technologies ENA Series User Manual page 219

Step 5. On the first screen of Add Printer Wizard, click
figure, check that "Local printer" is selected and click
Step 6. The screen to select the manufacturer and model name of the printer appears. Select the
manufacturer (1 in Figure 9-8) and the model name (2 in Figure 9-8) and then click
CAUTION Do not select other than supported printers because doing so may give serious damage to
the E5070A/E5071A.
Figure 9-8 Selecting manufacturer and model name (example for Hewlett Packard Deskjet
930C)
Step 7. If the screen that asks you whether you want to keep the existing printer driver, select
"Keep existing driver[recommended]" as shown below and click
Chapter 9
Using a Printer to Output the Screen Image
. When the screen shown in the below
Next
.
Next
Next
Data Output
.
Next
.
211