Agilent Technologies ENA Series User Manual page 230

Limit Test
Limit Test
NOTE When the frequency is set at zero span, the limit test is performed with reference to the
frequency, not to the time. Even if the frequency on the E5070/E5071A is set at zero span,
enter the two parameters, Begin Stimulus and End Stimulus.
NOTE When two or more response values are returned as a result of using the Smith or polar chart
format, the first response value of the marker provides the object of the limit test.
222
*3.The range in which stimulus values can be specified is from -500 MHz to +500 MHz.
When a value outside the range is entered, a suitable value within the range is specified.
*4.After the response value is specified, changing formats results in changing the units but
not the value.
Chapter 10