Agilent Technologies ENA Series User Manual page 239

Figure 11-4 Effects of Smoothing (Group Delay Format)
Setting Up Smoothing
Setup the smoothing operation by following the steps below.
Step 1. Press
which smoothing will be defined.
Step 2. Press
Step 3. Press
Step 4. Change the smoothing aperture (%) in the data entry area.
Step 5. Press
Chapter 11
(or ) and
.
.
Smo Aperture
to turn the smoothing.
Smoothing ON
Optimizing Measurements
Reducing Trace Noise
(or ) to activate the trace on
231