Chapter 1: General Information
Recommended Test Equipment
Equipment
Flying Lead Probe Set
(Qty 2)
Ground Clips
(Qty 10)
Stimulus Board
Pulse Generator
150 ps Transition Time
Converter
(Qty 4)
Oscilloscope
SMA Coax Cable
(Qty 2)
Male BNC to Female
SMA Adapters
(Qty 2)
SMA/Flying Lead Test
Connectors, (f) SMA to (f)
SMA to Flying Lead Probe
(Qty 4)
† P = Performance Tests, T = Troubleshooting
14
Artisan Technology Group - Quality Instrumentation ... Guaranteed | (888) 88-SOURCE | www.artisantg.com
Critical Specification
No substitute
No substitute
No substitute
≥ 310 MHz, two channels, differential
outputs, 150-180 ps rise/fall time (if
faster, use transition time converters)
Required if pulse generator's rise time is
less than 150 ps. (Pulse generator
conditions: Voffset=1V, ∆V=250 mV.)
Required for 8133A opt. 003.
Bandwidth ≥ 1.5 GHz,
sampling rate ≥ 8 GSa/s
>18 GHz bandwidth
>18 GHz bandwidth
No substitute
Recommended Model/Part
Agilent E5382A
16517-82105 (pkg of 20)
(Included with E5382A Probe Set)
16760-60001
Agilent or HP 8133A Option 003
Agilent or HP 15435A
Agilent or HP 54845A or 54845B
Agilent or HP 8120-4948
Cambridge Products CP-AD507
(see www.cambridgeproducts.com)
See "Assemble the SMA/Flying Lead
Test Connectors" on page 23
Use†
P, T
T
T
P, T
P
P
P
P
P