Agilent Technologies ENA Series User Manual page 417

Key Operation
(Continued)
Fixture Simulator
De-Embedding
Displays softkeys for selecting the type of network de-embedding to be performed on the test port selected in the
Select Type
Select Port
Does not allow network de-embedding on the test port selected in the
None
Select Port
De-embeds a user-defined network from the test port selected in the
User
menu. The user-defined network should be prepared in the 2-port
Port
Touchstone data format and loaded onto the E5070A/E5071A from the
menu.
File
Returns to the softkey display screen one level higher.
Cancel
Opens a dialog box for reading a 2-port Touchstone data file prepared by
User File
the user. Selecting
network.
Returns to the softkey display screen one level higher.
Return
*1 Displays softkeys for setting up the differential matching circuit function. This function uses internal software to
Diff Matching
convert the characteristics of a balanced port to those with an inserted differential matching circuit.
Enables or disables the differential matching circuit function.
Diff. Matching
Displays softkeys for selecting a balanced port to which a differential matching circuit will be added.
Select Bal Port
*2 Selects port 1 on the DUT for adding a differential matching circuit.
1
Selects port 2 on the DUT for adding a differential matching circuit.
2
Selects port 3 on the DUT for adding a differential matching circuit.
*2
3
Returns to the softkey display screen one level higher.
Cancel
Displays softkeys for selecting the type of differential matching circuit.
Select Circuit
Does not allow a differential matching circuit to be added to the balanced
None
port selected in the
Adds a shunt L - shunt C type differential matching circuit to the port
ShuntL -
selected in the
ShuntC
Adds a user-defined differential matching circuit to the port selected in the
User
Select Bal Port
be provided in the 2-port Touchstone data format and loaded onto the
E5070A/E5071A from the
Returns to the softkey display screen one level higher.
Cancel
Sets the value of C for the shunt L - shunt C differential matching circuit to
C
be added to the balanced port selected in the
Sets the value of G for the shunt L - shunt C differential matching circuit to
G
be added to the balanced port selected in the
Sets the value of L for the shunt L - shunt C differential matching circuit to
L
be added to the balanced port selected in the
Sets the value of R for the shunt L - shunt C differential matching circuit to
R
be added to the balanced port selected in the
Opens a dialog box for reading a 2-port Touchstone data file prepared by
User File
the user. Selecting
differential matching circuit.
Returns to the softkey display screen one level higher.
Return
Appendix D
Function
menu.
menu.
in the menu will de-embed the loaded
User Select Type
menu.
Select Bal Port
menu.
Select Bal Port
menu. The user-defined differential matching circuit should
menu.
User File
Select Bal Port
Select Bal Port
Select Bal Port
Select Bal Port
in the menu adds the loaded
User Select Circuit
Softkey Functions
Analysis Menu
SCPI Command
:CALC{1-9}:FSIM:SEND:DEEM:
PORT{1-4} NONE
:CALC{1-9}:FSIM:SEND:DEEM:
Select
PORT{1-4} USER
User
:CALC{1-9}:FSIM:SEND:DEEM:
PORT{1-4}:USER:FIL
:CALC{1-9}:FSIM:BAL:DMC:STAT
:CALC{1-9}:FSIM:BAL:DMC:BPOR1
:CALC{1-9}:FSIM:BAL:DMC:
BPOR{1-2}
:CALC{1-9}:FSIM:BAL:DMC:BPOR1
:CALC{1-9}:FSIM:BAL:DMC:
BPOR{1-2} NONE
:CALC{1-9}:FSIM:BAL:DMC:
BPOR{1-2} PLPC
:CALC{1-9}:FSIM:BAL:DMC:
BPOR{1-2} USER
:CALC{1-9}:FSIM:BAL:DMC:
BPOR{1-2}:PAR:C
menu.
:CALC{1-9}:FSIM:BAL:DMC:
BPOR{1-2}:PAR:G
menu.
:CALC{1-9}:FSIM:BAL:DMC:
BPOR{1-2}:PAR:L
menu.
:CALC{1-9}:FSIM:BAL:DMC:
BPOR{1-2}:PAR:R
menu.
:CALC{1-9}:FSIM:BAL:DMC:
BPOR{1-2}:USER:FIL
409