Setting and Using the Control and Management Functions
Accessing to hard disk of the E5070A/E5071A from an external PC via LAN
Accessing to hard disk of E5070A/E5071A from external PC
This section describes the procedure to connect to the hard disk (drive D) in the
E5070A/E5071A from the external PC, taking Windows 98 Ò as an example. For
information on connection, see your PC's operation manual.
Step 1. From the Start menu, click Programs - Windows Explorer to start the Explorer.
Step 2. From the Explorer's menu, click
Step 3. The Map Network Drive dialog box appears. Select an appropriate drive (1 in Figure
12-17), enter
button.
Figure 12-17
Map Network Drive dialog box
NOTE
e507x
the computer name when setting the network, use the computer name you changed instead
of
NOTE
If you use another OS such as Windows NTÒ, you may be prompted to enter the user name
but you can leave it blank.
Step 4. The Enter Network Password dialog box appears. Enter the password,
click the
Figure 12-18
Enter Network Password dialog box
260
as the network path (2 in Figure 12-17), and then click the
\\e507x\user$
in the network path is the computer name of the E5070A/E5071A. If you changed
.
e507x
button. The D drive of the E5070A/E5071A is connected to the PC.
OK
Tools - Map Network Drive...
.
OK
, and then
e507xa
Chapter 12