Agilent Technologies ENA Series User Manual page 68

Setting Measurement Conditions
Stimulus Settings
Setting the Range with the Lowest and Highest Values
Step 1. Press
be set.
Step 2. Press
Step 3. Using the ENTRY block keys on the front panel, input the lowest frequency.
Step 4. Press
Step 5. Using the ENTRY block keys on the front panel, input the highest frequency.
Setting the Range with the Center Value and a Span
Step 1. Press
be set.
Step 2. Press
Step 3. Using the ENTRY block keys on the front panel, input the center frequency.
Step 4. Press
Step 5. Using the ENTRY block keys on the front panel, input a frequency span.
Setting the Frequency Range Using the Marker
Step 1. In the channel window whose range must be set, place the active marker on the active trace
to a position that corresponds to the new range (to the lowest, highest, or center frequency).
Step 2. Press
Step 3. Press the softkey that corresponds to each frequency.
Softkey
Marker ® Start
Marker ® Stop
Marker ® Center
NOTE If the reference marker is on and the stimulus value of the active marker is expressed by a
value relative to the reference marker, the absolute stimulus value will be used to set the
new frequency range.
60
or to select the channel for which the frequency range will
.
.
or to select the channel for which the frequency range will
.
.
.
Function
Sets the lowest frequency to the stimulus value of the active marker on
the currently active trace.
Sets the highest frequency to the stimulus value of the active marker on
the currently active trace.
Sets the center frequency to the stimulus value of the active marker on
the currently active trace.
Chapter 3