Agilent Technologies ENA Series User Manual page 115

Figure 4-24 ECalAssistant (Connection) Dialog Box
Step 14. Re-connect the ECal module following the instructions given in each dialog box and
continue the calibration process.
Step 15. When all calibration data have been collected, a dialog box with the Complete! sign
appears as shown in Figure 4-25. Press the
wish to cancel the calibration, press the
Figure 4-25 EcalAssistant (Finish) Dialog Box
Chapter 4
Full 3-Port and Full 4-Port Calibration Using the 2-Port ECal
Done
button.
Cancel
button to finish the calibration. If you
Calibration
107