Agilent Technologies ENA Series User Manual page 117

Softkey
2-Port ECal
3-Port ECal
4-Port ECal
Thru ECal
*1.Options 313, 314, 413, and 414 only
*2.Options 413 and 414 only
Step 5. If you must select a port, the softkey to select a port is displayed. Select a port and start
calibration. If you do not have to, this step is skipped.
Step 6. The E5070A/E5071A detects the test ports connected to the ECal and then measurement
starts.
NOTE If a test port to be calibrated is not connected to the ECal module, an error occurs.
Chapter 4
*1
*2
Calibration using 4-port ECal
Function
Full 2-port calibration.
Full 3-port calibration.
Full 4-port calibration.
Thru calibration.
Calibration
109