Agilent Technologies ENA Series User Manual page 43

Figure 2-3 Data Entry Bar
NOTE To manipulate the data entry bar using the front panel keys, the data entry bar must be
selected as the object to be manipulated (with the focus placed on it). When the focus is
placed on the data entry bar, the entire bar is displayed in blue. Pressing or clicking
in the "8. ENTRY Block" on page 30 enables you to move the focus to the desired object.
2-1. Parameter Name
Displays the name of the parameter for which data will be entered.
2-2. Data Entry Area
When the data entry bar is displayed for the first time, the current settings are displayed on
it. You can change numeric values by typing from the keyboard or in the ENTRY block on
the front panel.
2-3. Step Button (Small)
Increases or decreases the numeric value in the data entry area in small steps. Use the
mouse to manipulate this button.
2-4. Step Button (Large)
Increases or decreases the numeric value in the data entry area in large steps. Use the
mouse to manipulate this button.
2-5. Enter Button
After typing numeric values in the data entry area by using the keyboard or the numeric
keys in the ENTRY block on the front panel, press this button to finish the entry. Use the
mouse to manipulate this button.
2-6. Close Button
Closes the data entry area (turns off the display). Use the mouse to manipulate this button.
Chapter 2
Overview of Functions
Screen Area: Names and Functions of Parts
35