Agilent Technologies ENA Series User Manual page 298

Measurement Examples
Evaluating a Duplexer
Step 2. Load and execute the 3-/4-port ECal programs.
Setup Description
Opening the VBA Project Open dialog box
Loading "ECalAssistant.VBA"
Executing the program
Step 3. The EcalAssistant (Start) dialog box appears (Figure 14-8).
Figure 14-8 EcalAssistant (Start) Dialog Box
Step 4. Pressing the
(Figure 14-9).
Figure 14-9 EcalAssistant (Port/Channel Selection) Dialog Box
Step 5. Following the instructions in the dialog box, select the type of ECal, test ports, and a
channel.
Setup Description
Select Ports
Select Channel
Channel 1
290
button to display the EcalAssistant (Port/Channel Selection) dialog box
Next
ECal type: Full 3-port calibration
Test ports to be used for ECal: 1, 2, and 3
Channel on which ECal is to be executed:
Key Operation
-
Load Project
Select "D:\Agilent\ECalAssistant.VBA" and
press the button.
Open
Key Operation
3 Port
1, 2, 3
:
Channel 1
Chapter 14