Ports - Agilent Technologies WireScope 350 User Manual

Ports

T€h…‡Q…‚irÇr†‡Ãƒ‚…‡
6É7ÃVT7Â…‡†
8uh…tvtÂ…‡
8‚€ƒhp‡Ayh†uŒÃph…qÆy‚‡
SmartProbe test port: The SmartProbe test port accepts all
compatible probes. The WireScope 350 automatically determines what
type of probe is attached, selects appropriate screens and modes, and
warns of any configuration conflicts.
USB ports: The WireScope 350 has a universal serial bus (USB)
interface for high speed communication with PCs and peripherals. The
DualRemote 350 has a USB slave port.
Serial port: The RS-232 8-pin DIN serial port allows serial
communication with a PC for software upgrades or data transfer. An
8-pin DIN to DB-9 cable is included in the kit.
Talkset jack: Both the WireScope 350 and DualRemote 350 have
talkset jacks to improve coordination within testing teams. Operators
can communicate over the tested cabling when autotests are not
running.
Charging port: An external charger port allows charging of the
long-life NiMH battery pack.
CompactFlash™ Slot: This slot accepts CompactFlash™ cards, for
storing and transferring data, upgrading the WireScope software, and
loading user-defined profiles.
Xv…rTp‚ƒrÃh‡ÃhÃByhpr
8‚‡…h†‡Ãhqwˆ†‡
Uhyx†r‡Ãwhpx
Tr…vhyÂ…‡
ST!"!
Br‡‡vtÃT‡h…‡rq
1−3