Agilent Technologies ENA Series User Manual page 49

Overview of Functions
Screen Area: Names and Functions of Parts
5-1. Channel Title Bar
You can assign a title to each channel and have the title displayed on the bar. For more
about setting up a channel title bar, see "Labeling a Window" on page 74.
5-2. Trace Name/Measurement Parameter
The names of the traces (Tr1 through Tr9)on the channel and their measurement
parameters are displayed here. to the right of the trace name indicates the active trace
(the trace for which setup is being performed). To make a trace active, use or
. Clicking the line where the trace name is placed (the mouse pointer changes
from to ) also makes a trace active.
5-3. Data Format
The data format of each trace is displayed here. For more on setting up data formats, see
"Selecting a Data Format" on page 66.
5-4. Scale Settings
The scale setting for each trace is displayed here. This example shows that ì10.00dB/î
corresponds to 10 dB per division. "Ref 0.000dB" shows that the value of the reference line
is at 0 dB. For more about setting scales, see "Setting the Scales" on page 70.
Chapter 2 41