Toyota Tundra 2005 Service - Repair - Maintenance page 2409

PR−16
90_
Center Bearing Center Line
0 ± 1.0 mm (0 ± 0.039 in.)
Center Bearing Housing Center Line
PROPELLER SHAFT
Bracket Center
Line
Shaft Axial
Direction
F07986
Q07263
− PROPELLER SHAFT ASSEMBLY (4WD)
3. ADJUST CENTER SUPPORT BEARING
HINT:
S
With the vehicle unloaded, adjust the center support
bearing to keep the angles, as shown.
S
Under the same conditions, check the center line in the
axial direction. Adjust the bearing if necessary.
S
The center bearing center line and center bearing hous-
ing center line must be adjusted to within 0 ±1.0 mm of
each other in the vehicle's longitudinal direction with the
vehicle unloaded.
Torque the 2 bolts.
Torque: 40 N·m (410 kgf·cm, 30 ft·lbf)