Toyota Tundra 2005 Service - Repair - Maintenance page 2032

CO−6
COOLING (1GR−FE) − WATER PUMP
REMOVAL
1. REMOVE ENGINE UNDER COVER
2. DRAIN ENGINE COOLANT
3. REMOVE V−BANK COVER
4. LOOSEN FAN W/ FLUID COUPLING
(a) Loosen the 4 fluid coupling bolts.
5. REMOVE FAN AND GENERATOR V BELT
(See page EM−62)
6. REMOVE FAN W/ FLUID COUPLING
(a) Disconnect the radiator reserve tank hose.
(b) Remove the 4 fan shroud bolts.
(c) Remove the 4 fluid coupling nuts, and then remove the
fan w/ fluid coupling and fan shroud together.
A23114
(d) Remove the fan pulley.
7. DISCONNECT VENTILATION HOSE NO.2
8. REMOVE AIR CLEANER
9. REMOVE WATER INLET
(a) Disconnect the 2 oil cooler hoses (w/ oil cooler).
A23116
(b) Disconnect the 2 radiator hoses.
A23117
CO1D7−01