Toyota Tundra 2005 Service - Repair - Maintenance page 2294

SST
Clutch Hub No.1
Spring
Synchromesh
Ball
Shifting Key
MANUAL TRANSMISSION (RA60)
(c)
D13986
7.
(a)
D13987
(b)
(c)
D13988
(d)
D13989
8.
Remove the hub sleeve, 3 synchromesh shifting keys, 3 balls
and 3 springs from the clutch hub No.1.
HINT:
Be careful not to scatter the balls or springs.
Hub Sleeve
D13949
− COUNTER GEAR
Remove the synchronizer ring set No.1.
REMOVE 2ND GEAR
Using a snap ring expander, remove the snap ring.
Using SST and a press, remove the clutch hub No.1 and
2nd gear.
SST 09950−00020
Remove the needle roller bearing.
Remove the synchronizer ring set No.1 from the 2nd gear.
DISASSEMBLE CLUTCH HUB NO.1
MT−51