Toyota Tundra 2005 Service - Repair - Maintenance page 2663

Black Cable
F19555
F19556
Red Cable
F19557
F19558
F19559
BRAKE − HYDRAULIC BRAKE BOOSTER (w/ VSC)
4. REMOVE BRAKE ACTUATOR TUBE NO. 1
(a) Using SST, remove the brake actuator tube No. 1 from the
hydraulic brake booster assembly.
Torque: 15.2 N·m (155 kgf·cm, 11.2 ft·lbf)
5. REMOVE BRAKE BOOSTER W/ ACCUMULATOR
(a) Using a screwdriver, remove the 2 plugs from the hydrau-
lic brake booster assembly.
(b) Remove the 2 screws and pull the wire harness from the
hydraulic brake booster assembly.
Torque: 2.9 N·m (30 kgf·cm, 26 in.·lbf)
(c) Using a screwdriver, remove the clip from the hydraulic
brake booster assembly.
(d) Using a hexagon wrench (4 mm), loosen the 2 pins and
brake booster w/ accumulator pump assembly from the
hydraulic brake booster assembly.
Torque: 7.8 N·m (80 kgf·cm, 69 in.·lbf)
(e) Remove the 2 pins, 2 bushes and 2 collars from the brake
booster w/ accumulator pump assembly.
BR−87