Toyota Tundra 2005 Service - Repair - Maintenance page 2033

COOLING (1GR−FE) − WATER PUMP
(c) Disconnect the 5 water by−pass hoses.
A23118
(d) Remove the 5 bolts and water inlet.
(e) Remove the O−ring from the water outlet pipe.
(f) Remove the gasket from the water pump.
A23119
10. REMOVE IDLER PULLEY NO.2
(a) Remove the 2 bolts and 2 idler pulleys.
11. REMOVE GENERATOR (See page CH−7)
12. SEPARATE COOLER COMPRESSOR
(See page EM−105)
13. REMOVE V−RIBBED BELT TENSIONER
(Seepage EM−32)
A22878
14. REMOVE WATER PUMP
(a) Remove the 17 bolts, water pump and gasket.
A22973
CO−7