Toyota Tundra 2005 Service - Repair - Maintenance page 2120
Hide thumbs
Also See for Tundra 2005:
- Pocket reference manual (17 pages) ,
- Owner's manual (703 pages) ,
- Owner's manual (498 pages)
Table of Contents
Advertisement
IG−12
IGNITION (1GR−FE)
−
VVT SENSOR
INSTALLATION
1.
INSTALL VVT SENSOR
(a)
LH bank side VVT sensor.
(1)
Apply a light coat of engine oil to an O−ring of the
VVT sensor.
(2)
Install the VVT sensor with the bolt.
Torque: 9.0 N m (92 kgf cm, 80 in. lbf)
(3)
Connect the VVT sensor connector.
A23145
(4)
Connect the water by−pass hose No. 4 and No. 5.
A23144
(b)
RH bank side VVT sensor.
(1)
Apply a light coat of engine oil to an O−ring of the
VVT sensor.
(2)
Install the VVT sensor with the bolt.
Torque: 9.0 N m (92 kgf cm, 80 in. lbf)
(3)
Connect the VVT sensor connector.
2.
INSTALL AIR CLEANER (See page EM−89)
3.
INSTALL V−BANK COVER
4.
ADD ENGINE COOLANT
A23143
IG0MQ−01
Advertisement
Table of Contents
