Toyota Tundra 2005 Service - Repair - Maintenance page 2322

AT−12
AUTOMATIC TRANSMISSION (A750E, A750F)
Bolt
Orange
Blue
Clamp
Bolt
VALVE BODY ASSEMBLY
ON−VEHICLE REPAIR
1.
(a)
(b)
D13867
2.
NOTICE:
Some fluid will remain in the oil pan.
(a)
(b)
D13866
3.
Remove the magnets and use them to collect any steel par-
ticles. Carefully look at the foreign matter and particles in the
pan and on the magnets to anticipate the type of wear you will
find in the transmission.
Steel (magnetic) ... bearing, gear and clutch plate wear
Brass (non−magnetic) ... bushing wear
AT0103
4.
Remove the 4 bolts, the oil strainer and the O−ring.
NOTICE:
Be careful as some fluid will come out with the oil strainer.
D12703
5.
Clamp
(a)
(b)
D12704
− VALVE BODY ASSEMBLY
DRAIN AUTOMATIC TRANSMISSION FLUID
Remove the drain plug and gasket, and drain the ATF.
Install a new gasket and the drain plug.
Torque: 20 N·m (204 kgf·cm, 15 ft·lbf)
REMOVE OIL PAN
Remove the 20 bolts.
Remove the oil pan gasket.
EXAMINE PARTICLES IN PAN
REMOVE OIL STRAINER
REMOVE ATF TEMPERATURE SENSOR
Disconnect the 7 solenoid valve connectors.
Remove the 2 bolts, clamps and ATF temperature sen-
sors.
AT13P−01