Toyota Tundra 2005 Service - Repair - Maintenance page 1966

SF−24
SFI (2UZ−FE)
INJECTOR
ON−VEHICLE INSPECTION
1. REMOVE THROTTLE BODY COVER
2. REMOVE INTAKE AIR CONNECTOR
3. INSPECT INJECTOR RESISTANCE
Ohmmeter
(a) Disconnect the 8 injector connectors.
(b) Using an ohmmeter, measure the resistance between the
terminals.
Resistance: 13.4 to 14.2 Ω at 20°C (68°F)
If the resistance is not as specified, replace the injector.
(c) Reconnect the 8 injector connectors.
4. REINSTALL INTAKE AIR CONNECTOR
5. REINSTALL THROTTLE BODY COVER
B04442
− INJECTOR
SF0OR−12