Toyota Tundra 2005 Service - Repair - Maintenance page 2282

4th Gear Side:
A
A>B
6th Gear Side:
MANUAL TRANSMISSION (RA60)
2.
(a)
(b)
(c)
(d)
(e)
NOTICE:
Be careful not to scatter the balls.
HINT:
Make sure that the clutch hub No.2 is installed in the direction
shown in the illustration.
3rd Gear Side:
B
D13960
3.
(a)
(b)
(c)
(d)
(e)
NOTICE:
Be careful not to scatter the balls.
HINT:
Make sure that the clutch hub No.3 is installed in the direction
shown in the illustration.
Output Shaft
Side:
D13961
− INPUT SHAFT
ASSEMBLE CLUTCH HUB NO.2
Apply gear oil to the clutch hub sleeve and clutch hub.
Install the clutch hub sleeve to the clutch hub No.2.
Install the 3 shifting keys to the clutch hub.
Install the 3 shifting key springs to the clutch hub.
Place the balls on the holes on the shifting keys, and
install the hub sleeve while pushing down the balls.
ASSEMBLE CLUTCH HUB NO.3
Apply gear oil to the clutch hub sleeve and clutch hub.
Install the clutch hub sleeve to the clutch hub No.3.
Install the 3 shifting keys to the clutch hub.
Install the 3 shifting key springs to the clutch hub.
Place the balls on the holes on the shifting keys, and
install the hub sleeve while pushing down the balls.
MT−39