MT−2
TROUBLESHOOTING
PROBLEM SYMPTOMS TABLE
Use the table below to help find the cause of the problem. The numbers indicate the priority of the likely
causes of the problem. Check each part in order. If necessary, replace these parts.
Noise
Oil leakage
Hard to shift or will not shift
Jumps out of gear
MANUAL TRANSMISSION (RA60)
Symptom
−
TROUBLESHOOTING
Suspected Area
1. Oil (Level low)
2. Oil (Wrong)
3. Gear (Worn or damaged)
4. Bearing (Worn or damaged)
1. Oil (Level too high)
2. Gasket (Damaged)
3. Oil seal (Worn or damaged)
4. O−ring (Worn or damaged)
1. Synchronizer ring (Worn or damaged)
2. Shift key spring (Damaged)
1. Locking ball spring (Damaged)
2. Shift fork (Worn)
3. Gear (Worn or damaged)
4. Bearing (Worn or damaged)
MT0HN−01
See page
MT−7
MT−7
MT−10
MT−10
MT−7
MT−10
MT−10
MT−10
MT−34
MT−52
MT−34
MT−52
MT−61
MT−34
MT−52
MT−10
MT−10