Toyota Tundra 2005 Service - Repair - Maintenance page 2257

MT−14
MANUAL TRANSMISSION (RA60)
10.
(a)
D14023
(b)
D14024
11.
(a)
D14069
(b)
(c)
SST
D13919
(d)
(e)
D14026
− MANUAL TRANSMISSION ASSEMBLY
REMOVE SPEEDOMETER DRIVE GEAR
Using a snap ring expander, remove the snap ring.
Remove the speedometer drive gear, ball and oil receiver
pipe.
REMOVE OUTPUT SHAFT ADJUST NUT
Using a chisel and hammer, unstake the nut.
Shift to fifth gear, and then hold the input shaft with SST.
SST 09556−16030
Using a belt and wooden block, fasten the transmission
to the work bench.
Using SST, remove the nut from the output shaft.
SST 09922−10010
Remove the belt and wooden block from the transmis-
sion.