Toyota Tundra 2005 Service - Repair - Maintenance page 2308

MANUAL TRANSMISSION (RA60)
REASSEMBLY
1.
(a)
(b)
(c)
D14018 (d)
(e)
D14017
2.
(a)
D14016
(b)
D14015
3.
(a)
(b)
D14014
− CONTROL SHAFT ASSEMBLY
INSTALL SHIFT & SELECT LEVER
Install the spring and lock ball pin to the shift & select le-
ver.
Install the shift & select lever to the shift & select lever
cam.
Install the shift & select lever shaft to the shift & select le-
ver and shift & select lever cam.
Install a new E−ring to the shift & select lever shaft.
Install the bolt to the shift & select lever.
Torque: 33 N·m (340 kgf·cm, 25 ft·lbf)
INSTALL SHIFT ARM
Install the shift arm and shift arm pivot to the interlock
bracket.
Install a new E−ring to the shift arm pivot.
INSTALL SHIFT FORK SHAFT NO.4
Install the spring and ball to the interlock bracket.
Install the shift fork shaft No.4.
MT−65
MT0I8−01