Toyota Tundra 2005 Service - Repair - Maintenance page 2286

Hide thumbs Also See for Tundra 2005:

Table of Contents

MANUAL TRANSMISSION (RA60)

Using SST and a press, install the clutch hub No.3 to the

input shaft.

09309−37010, 09950−00020

Make sure that the gear and synchronizer ring move

Select a snap ring that allow for the minimum amount of

Standard clearance: 0.1 mm (0.0039 in.) or less

Using a brass bar and hammer, install the snap ring.

Thickness mm (in.)

2.10 to 2.15 (0.0827 to 0.0846)

2.15 to 2.20 (0.0846 to 0.0866)

2.20 to 2.25 (0.0866 to 0.0886)

2.25 to 2.30 (0.0886 to 0.0906)

2.30 to 2.35 (0.0906 to 0.0925)

2.35 to 2.40 (0.0925 to 0.0945)

2.40 to 2.45 (0.0945 to 0.0965)