Toyota Tundra 2005 Service - Repair - Maintenance page 2235

CLUTCH − CLUTCH RELEASE CYLINDER
REMOVAL
1. REMOVE FILLER CAP AND FLOAT FROM RES-
ERVOIR
2. DRAW OUT BRAKE FLUID WITH SYRINGE
NOTICE:
Do not let brake fluid remain on a painted surface. If brake
fluid spill onto a painted surface, wash it off immediately.
3. REMOVE CLUTCH HOUSING COVER
Remove the 3 bolts and clutch housing cover.
D13769
4. REMOVE CLUTCH ACCUMULATOR
(a) Remove the bolt and clamp.
(b) Using SST, disconnect the clutch lines from the clutch ac-
cumulator and clutch release cylinder. Use a container to
catch the fluid.
SST
D13770
(c) Remove the 3 bolts and clutch accumulator.
D13771
5. REMOVE CLUTCH RELEASE CYLINDER
Remove the 2 bolts and clutch release cylinder.
D13772
09023−00101
CL−11
CL0ES−01